| Analog Inputs [1] | 3 (1 x BNC + 2 x POD) |
| Analog Channels | 2 (alt/chop via POD), 1 (mixed or BNC) |
| Analog Bandwidth [2] | 70 MHz |
| Logic Inputs | 8 (via POD) |
| Input Impedance | 1M/20 pF (BNC), 100K/5 pF (POD) |
| Input Voltage Range (+/-) | 51.3 mV (x10 prescale) to 1kV (x100 probe) |
| Vertical Scaling (DSO) | 500 uV/Div to 500 V/Div (x100 probe) |
| Timebase Range (DSO) | 50 nS/Div to 400 mS/Div |
| Post-Trigger Delay (DSO) | 8 uS to 2 hours (programmable) |
| Input Prescaler [3] | x10 |
| Analog Sensitivity | 2mV to 40mV (x1, no prescale enabled) |
| Maximum Sensitivity [4] | 300 uV (Time), 70uV (Freq), 10uV (Mean) |
| Fast Sample Rates | 4, 5, 10, 13.5, 20, 25, 33, 40 MS/s |
| Slow Sample Rates [5] | 4 kHz to 1 MHz (slow) & <1 Hz (burst mode) |
| Channel Buffer Depth | 32 kS x 1 or 16 kS x 2 (analog/mixed), 32 kS x 8 (logic) |
| Resolution (Converter) | TLC5540 8 bit converter with 6.8 to 7.6 ENOB |
| Maximum Resolution [6] | 11.5 ENOB |
| Glitch Capture>(min) | 25 nS |
| External Trigger Bus | No (but logic input can be used) |
| BitScope Digital Trigger | 8 bit combinatorial on logic or A/D output. |
| High Speed Analog Trigger | YES (on any analog input) |
| Waveform Generator [7] | 10 MS/s (via BNC connector and POD pin 26) |
| Analog Interface | 1 x BNC and 2 x POD |
| Logic Interface | 1 x DB25 (inc. logic, analog, data and power) |
| Display Refresh Rate (max) | 50 Hz (single channel), 25 Hz (dual or mixed) |
| Data Upload Speed (max) | 1.0 Mb/s |
| PC Host Interface | USB 2.0 (USB 1.1 compatible) |
| Included PC Software | BitScope DSO Virtual Instrument Application |
| Power Requirement [8] | 12 VDC @ 250 mA (max), 2.5mm CP or USB Powered |
| Operating Temperature | 0ºC to 50ºC |
| Storage Temperature | -20°C to +60°C |
| Size (WxHxD) | 100 x 25 x 100 mm |
